 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Mini Top View LEDs 65-21/Y2C-CJ2L2X/3T Features White SMT package. Optical indicator. Wide viewing angle. Soldering methods: IR reflow soldering Available on tape and reel Pb-free The product itself will remain within RoHS compliant version. Descriptions The 65-21 series is available in soft orange, green, blue, and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. Besides, LED is mounted top down and emits through the PCB. This feature makes the ideal for light pipe application. Applications Optical indicators. Coupling into light guides. Backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting). Coupling into light guides; Interior automotive lighting (e.g. dashboard backlighting, etc.). Device Selection Guide Chip Material AlGaInP Emitted Color Brilliant Yellow Resin Color Water Clear Everlight Electronics Co., Ltd. Device No.: DSE-651-277 http://www.everlight.com Prepared date: 24-Apr-2007 Rev. 1 Page: 1 of 10 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 65-21/Y2C-CJ2L2X/3T Package Outline Dimensions Notes: Tolerance of DimensionG 0.1mm. Unit = mm Everlight Electronics Co., Ltd. Device No.: DSE-651-277 http://www.everlight.com Prepared date: 24-Apr-2007 Rev. 1 Page: 2 of 10 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 65-21/Y2C-CJ2L2X/3T Absolute Maximum Ratings (Ta=25J ) Parameter Reverse Voltage Forward Current Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Electrostatic Discharge (HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF Pd IFP ESD Topr Tstg Tsol Rating 5 25 60 60 2000 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 J Hand Soldering : 350 J Unit V mA mW mA V J J for 10 sec. for 3 sec. Electro-Optical Characteristics (Ta=25J ) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 2c 1/2 p d VF IR Min. 5.8 --------586 ------------Typ. ----120 591 ----15 2.0 ----Max. 18.0 --------592 ----2.4 10 Unit mcd deg nm nm nm V g A Condition IF=2mA IF=2mA IF=2mA IF=2mA IF=2mA IF=2mA VR=5V Notes: 1. Tolerance of Luminous Intensity O 11% 2. Tolerance of Dominant Wavelength O 1nm Everlight Electronics Co., Ltd. Device No.: DSE-651-277 http://www.everlight.com Prepared date: 24-Apr-2007 Rev. 1 Page: 3 of 10 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 65-21/Y2C-CJ2L2X/3T Bin Range of Dominant Wavelength Bin Code 1 2 Min 586 589 Max 589 592 Unit nm Condition IF=2mA Bin Range of Luminous Intensity Bin Code J2 K1 K2 L1 L2 Min. 5.8 7.2 9.0 11.5 14.5 Max. 7.2 9.0 11.5 14.5 18.0 mcd IF=2mA Unit Condition Everlight Electronics Co., Ltd. Device No.: DSE-651-277 http://www.everlight.com Prepared date: 24-Apr-2007 Rev. 1 Page: 4 of 10 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 65-21/Y2C-CJ2L2X/3T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No.: DSE-651-277 http://www.everlight.com Prepared date: 24-Apr-2007 Rev. 1 Page: 5 of 10 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 65-21/Y2C-CJ2L2X/3T Packing specification Label explanation (1) CPNG Customer's Production Number (2) P/NG Production Number (3) QTYG Packing Quantity (4) CATG Luminous Intensity Rank (5) HUEG Dom. Wavelength Rank (6) REFG Forward Voltage Rank (7) LOT NoG Lot Number RoHS Reel Dimensions NoteG Tolerances unless dimension 0.1mm. Unit = mm Everlight Electronics Co., Ltd. Device No.: DSE-651-277 http://www.everlight.com Prepared date: 24-Apr-2007 Rev. 1 Page: 6 of 10 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 65-21/Y2C-CJ2L2X/3T Carrier Tape Dimensions; Loaded quantity per reel 3000 PCS/reel Note: The tolerances unless mentioned is O 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.: DSE-651-277 http://www.everlight.com Prepared date: 24-Apr-2007 Rev. 1 Page: 7 of 10 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 65-21/Y2C-CJ2L2X/3T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence levelG 90% LTPDG 10% No. 1 Items Reflow Soldering Test Condition Temp. : 260J 5J Min. 5sec. H : +100J 15min 5 min L : -40J 15min H : +100J 5min 10 sec L : -10J 5min Temp. : 100J Temp. : -40J IF = 20 mA 85J / 85%RH Test Hours/Cycles 6 min Sample Size 22 PCS. Ac/Re 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. Everlight Electronics Co., Ltd. Device No.: DSE-651-277 http://www.everlight.com Prepared date: 24-Apr-2007 Rev. 1 Page: 8 of 10 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 65-21/Y2C-CJ2L2X/3T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30J or less and 90%RH or less. or less and 60% RH or 2.3 After opening the package: The LED's floor life is 1 year under 30J less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 605J 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C for 24 hours. 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350J for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No.: DSE-651-277 http://www.everlight.com Prepared date: 24-Apr-2007 Rev. 1 Page: 9 of 10 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 65-21/Y2C-CJ2L2X/3T 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No.: DSE-651-277 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Rev. 1 Page: 10 of 10 http://www.everlight.com Prepared date: 24-Apr-2007 Prepared by: Josh Chou |
Price & Availability of 65-21-Y2C-CJ2L2X-3T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |